Why is the wage gap between decoration painters very big, actually closely related to practice

2022-06-09 0 By

Actually blow be bored with child a lot of people think is to give the painter to do white line, need to color emulsioni paint color line, but a lot of people ignored the importance of blow be bored with child, wall roughness, the line that play a base and door window set of vertical and level off, the special custom furniture and custom furniture is very popular now after the installation of many are at the end of the putty emulsion paint,So be bored with child blow well not only about beautiful but also about installation of late finished products!There are several ways to blow putty, respectively what price, which cost performance is higher!One, blow be bored with child run along the wall what call run along the wall, actually be cement metope direct blow three times white be bored with child powder, regardless of metope flatness error size direct blow white be bored with child hit sandpaper to brush latex paint calculate end, encounter metope to have slot place 10 centimeter grid affaffed.This is the cheapest and the most original, the final product is relatively poor, wall flatness is also relatively poor.Reference price case: 120 ping (construction area) *2.4 (construction coefficient) =288 ping *12 yuan/ping =3456 yuan.If the guest restaurant has the ceiling, the difficulty fee will be 300 yuan/piece, the total price: 3456+600=4056 yuan.Two, wall smooth method wall smooth scraping putty is relatively troublesome, first of all, the top surface of the wall to do the wall solid and other basic cleaning, grooves also need to take the grid, and then the Yin and Yang Angle to do the straight processing, and then the whole top surface of the wall all scraping leveling putty (paint plaster) full hang 1 meter grid, and then blow 2 times of white putty powder.Then all the skirting line and the position of the door and window cover are made leveling and straightening processing, and the final error of the overall wall flatness will be relatively small, generally within 3-5mm, but it can basically meet the later installation without much worry.The overall construction period is slightly more than the first approach, the difficulty has also increased.Then the construction of the material cost will be more than the first way to increase about 40%!Reference price case: 120 ping (construction area) *2.4 (construction coefficient) =288 ping *25 yuan/ping =7200 yuan.If the guest restaurant has the ceiling, the difficulty fee will be 300 yuan/piece, the total price: 7200+600=7800 yuan.Three, metope screed leveling This practice should be the most trouble in blow be bored with child processes the most was a way of construction, because every wall need ahead of screed line, specific construction methods and the second is similar, but the flat state can do metope, error can do the thickness of the yuan, is also high to the requirement of the master.The final renderings are very good.The only fly in the ointment is the high price.Reference price case: 120 ping (construction area) *2.4 (construction coefficient) =288 ping *45 yuan/ping =12960 Yuan.If the guest restaurant has the ceiling, the difficulty fee will be 300 yuan/piece, the total price: 12960+600=13560 yuan.Conclusion: metope reinforcement is the best and most rigorous way to blow putty, but the labor cost and material cost are very high, so the comprehensive cost performance is not high.Suit what decorate most or the second kind of metope is smooth scrape be putty child way, can reduce the error of metope flatness above all, also can solve later period installation problem, artificial and material price also is inside limits that accept in most people, recommend quite so